Kia EV6 - Page 273

65
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Warning timing
A: Driver assistance
1 Warning timing
2 Normal
3 Late
With the vehicle on, select Settings →
Vehicle → Driver assistance → Warn -
ing timing from the infotainment sys -
tem screen to change the initial warning
activation time for Blind-Spot Collision-
Avoidance Assist.
To select the Warning time
Normal or
Late .
僅
Normal : Use under normal driving
conditions. If it feels too sensitive, set
the warning timing to
Late .
僅 Late : The warning timing will be late
Warning volume
A: Driver assistance
1 Warning volume
2 High
3 Medium
4 Low
5 Off
With the vehicle on, select Settings →
Vehicle → Driver assistance → Warn -
ing volume from the infotainment sys -
tem screen to change the Warning
Volume to
High , Medium , Low or Off
for Blind-Spot Collision-Avoidance
Assist.
However, when Warning Volume is
turned Off, the steering wheel vibration
function will turn on if it was turned Off.
If you change the Warning Volume, the
warning volume of other Driver Assis
-
tance systems may change.
CAUTION
僅 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot Collision-
Avoidance Assist.
僅Even though
Normal is selected for
Warning Timing, if the vehicles
approaches at high speed, the initial
warning activation time may seem
late.
僅 Select
Late for Warning Timing when
traffic is light and when driving speed
is slow.
Blind-Spot Collision-Avoidance
Assist operation
Warning and control
Vehicle detection
僅 Warning light will appear in the out -
side rear view mirror and head-up dis -
play (if equipped).
Blind-Spot Collision-Avoidance Assist
will operate as following circumstances.
OCV041587L
OCV041562L
OCV051038L