85
6
6
Driving your vehicle Intelligent Speed Limit Assist (ISLA)
The setting of
Speed limit offset
is not
reflected in Navigation-based Smart
Cruise Control (NSCC).
Intelligent Speed Limit Assist
operation
Warning and control
Intelligent Speed Limit Assist will warn
and control the vehicle by 'Displaying
speed limit', 'Warning overspeed' and
'Changing set speed'.
Intelligent Speed Limit Assist warning
and control are described based on the
Offset set to
0
. For details on Offset set
-
ting, refer to "Intelligent Speed Limit
Assist settings" on page 6-84.
Displaying speed limit
Speed limit information is displayed on
the instrument cluster.
僅 If speed limit information of the road
cannot be recognized, '---' sign will be
displayed. Please refer to "Limitations
of Intelligent Speed Limit Assist" if the
road signs are difficult to recognize.
僅 Intelligent Speed Limit Assist provides
additional road sign information in
addition to speed limit. The additional
road sign information provided may
vary according to your country.
僅 Supplementary sign displayed under
the speed limit or overtaking restric
-
tion sign means the conditions under
which the signs must be followed. If
the supplementary sign is not recog
-
nized, it will be displayed as blank.
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator will blink.
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the
set speed needs to be changed. At this
To Next Page
Loading...
