109
6
6
Driving your vehicle Smart Cruise Control (SCC)
僅 Driving on a slippery surface due to
snow, water puddle, ice, etc.
僅 Driving on a curved road
僅 The vehicle in front is detected late
僅 The vehicle in front is suddenly
blocked by a obstacle
僅 The vehicle in front suddenly changes
lane or suddenly reduces speed
僅 The vehicle in front is bent out of
shape
僅 The front vehicle's speed is fast or
slow
僅 With a vehicle in front, your vehicle
changes lane suddenly at low speed
僅 The vehicle in front is covered with
snow
僅 Unstable driving
僅 You are on a roundabout and the
vehicle in front is not detected
僅 You are continuously driving in a cir
-
cle
僅 Driving in a parking lot
僅 Driving through a construction area,
unpaved road, partial paved road,
uneven road, speed bumps, etc.
僅 Driving on an incline road, curved
road, etc.
僅 Driving through a roadside with trees
or streetlights
僅 The adverse road conditions cause
excessive vehicle vibrations while
driving
僅 Your vehicle height is low or high due
to heavy loads, abnormal tire pres
-
sure, etc.
僅 Driving through a narrow road where
trees or grass are overgrown
僅 There is interference by electromag
-
netic waves, such as driving in an area
with strong radio waves or electrical
noise
僅 Driving on a curved road
On curved roads, Smart Cruise Con
-
trol may not detect a vehicle in the
same lane, and may accelerate to the
set speed. Also, vehicle speed may
rapidly decrease when the vehicle
ahead is detected suddenly.
Select the appropriate set speed on
curved roads and apply the brake
pedal or accelerator pedal according
to the road and driving conditions
ahead.
Your vehicle speed can be reduced
due to a vehicle in the adjacent lane.
Check to be sure that the road condi
-
tions permit safe operation of the
Smart Cruise Control and if necessary,
depress the brake pedal to reduce
your driving speed in order to main
-
tain a safe distance.
僅 Driving on a sloped road
During uphill or downhill driving, the
Smart Cruise Control may not detect a
To Next Page
Loading...
