139
6
6
Driving your vehicle Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
for Rear Cross-Traffic Collision-Avoid
-
ance Assist.
However, when Warning Volume is
turned off, the steering wheel vibration
function will turn on.
If you change the Warning Volume, the
warning volume of other Driver Assis
-
tance systems may change.
僅 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Rear Collision-Avoid
-
ance Assist.
僅Even though
Normal
is selected for
Warning Timing, if the vehicles from
the blind spot area approaches at
high speed, the initial warning activa
-
tion time may seem late.
僅 Select
Late
for Warning Timing when
traffic is light and when driving speed
is slow.
If the vehicle is restarted, Warning Tim
-
ing and Warning Volume will maintain
the last setting.
Rear Cross-Traffic Collision-
Avoidance Assist operation
Warning and control
Rear Cross-Traffic Collision-Avoidance
Assist will warn and control the vehicle
depending on collision level
僅 Collision Warning
僅Emergency Braking
僅 Stopping vehicle and ending brake
control
Collision warning
僅 To warn the driver of an approaching
vehicle from the rear left/right side of
your vehicle, the warning light on the
outside rear view mirror will blink and
a warning will appear on the cluster.
At the same time, an audible warning
will sound and the steering wheel will
vibrate. If the Rear View Monitor is
operating, a warning will also appear
on the infotainment system screen. (if
equipped)
僅 Rear Cross-Traffic Collision-Avoid
-
ance Assist will operate when all the
following conditions are satisfied:
- The gear is shifted to R (Reverse)
and the vehicle speed is below 8
km/h (5 mph)
- The approaching vehicle is within
approximately 25 m (82 ft.) from
the blind spot area of your vehicle
To Next Page
Loading...
