EasyManua.ls Logo

Kia EV6 - Page 355

Kia EV6
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
147
6
6
Driving your vehicle Reverse Parking Distance Warning (PDW)
one will be warned with an audible
warning.
Distance from object may be detected
differently when obstacles are not
located in front of the sensor.
The shape of the indicator in the illus
-
tration may differ from the actual
vehicle.
Reverse Parking Distance Warn
-
ing malfunction and precautions
Reverse Parking Distance Warn
-
ing malfunction
After starting the vehicle, a beep will
sound once when the gear is shifted to R
(Reverse) to indicate Reverse Parking
Distance Warning is operating normally.
However, if one or more of the following
occurs, first check whether the ultra
-
sonic sensor is damaged or blocked with
foreign material. If it still does not work
properly, Kia recommends visiting an
authorized Kia dealer/service partner.
The audible warning does not sound.
The buzzer sounds intermittently.
The warning message appears on the
cluster.
A:
Ultrasonic sensor error or blockage
Limitations of Reverse Parking
Distance Warning
Reverse Parking Distance Warning
may not operate normally when:
- Moisture is frozen to the sensor
(Reverse Parking Distance Warn
-
ing will operate normally when it is
melted.)
- Sensor is covered with foreign
material, such as snow or water
(Reverse Parking Distance Warn
-
ing will operate normally when
such foreign material are removed.)
- The weather is extremely hot or
cold
- The sensor or sensor assembly is
disassembled
- The surface of the sensor is
pressed hard or an impact is
applied with a hard object
- The surface of the sensor is
scratched with a sharp object
- The sensors or its surrounding area
is directly sprayed with high pres
-
sure washer
Reverse Parking Distance Warning
may malfunction when:
- Heavy rain or water spray is pres
-
ent
- Water flows on the surface of the
sensor
- Affected by another vehicle's sen
-
sors
- The sensor is covered with snow
- Driving on uneven road, gravel
roads or bushes
- Objects that generates ultrasonic
waves are near the sensor
- Installing the license plate differ
-
ently from the original location
- The vehicle bumper height or ultra
-
sonic sensor installation has been
modified
- Attaching equipments or accesso
-
ries around the ultrasonic sensors
The following objects may not be
detected:
OCV051191L

Table of Contents

Other manuals for Kia EV6

Related product manuals