EasyManua.ls Logo

Kia EV6 - Page 365

Kia EV6
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
157
6
6
Driving your vehicle Reverse Parking Collision-Avoidance Assist (PCA)
Bumper height or rear ultrasonic sen
-
sor installation has been modified
Rear view camera or rear ultrasonic
sensor(s) is damaged
Rear view camera or the rear ultra
-
sonic sensor(s) is stained with foreign
material, such as snow, dirt, etc.
Rear view camera is obscured by a
light source or by inclement weather,
such as heavy rain, fog, snow, etc.
The surrounding is very bright or very
dark
Outside temperature is very high or
very low
The wind is either strong (above 20
km/h (12 mph)) or blowing perpendic
-
ular to the rear bumper
Objects generating excessive noise,
such as vehicle horns, loud motorcy
-
cle engines or truck air brakes, are
near your vehicle
An ultrasonic sensor with similar fre
-
quency is near your vehicle
The pedestrians are difficult to recog
-
nize under following conditions:
- There is ground height difference
between the vehicle and the pedes
-
trian
- The image of the pedestrian in the
rear view camera is indistinguish
-
able from the background
- The pedestrian is near the rear
edge of the vehicle
- The pedestrian is not standing
upright
- The pedestrian is either very short
or very tall for Reverse Parking Col
-
lision- Avoidance Assist to detect
- The pedestrian or cyclist is wearing
clothing that easily blends into the
background, making it difficult to
detect
- The pedestrian is wearing clothing
that does not reflect ultrasonic
waves well
Size, thickness, height, or shape of the
object does not reflect ultrasonic
waves well (e.g., pole, bush, curbs,
carts, edge of a wall, etc.)
The pedestrian or the object is moving
The pedestrian or the object is very
close to the rear of the vehicle
A wall is behind the pedestrian or the
object
The object is not located at the rear
center of your vehicle
The object is not parallel to the rear
bumper
The road is slippery or inclined
The driver backs up the vehicle imme
-
diately after shifting to R (Reverse)
The driver accelerates or circles the
vehicle
Reverse Parking Collision-Avoidance
Assist may unnecessarily warn the driver
or assist with braking even if there are
no pedestrians or objects under the fol
-
lowing circumstances:
Any non-factory equipment or acces
-
sory is installed
Your vehicle is unstable due to an
accident or other causes
Bumper height or rear ultrasonic sen
-
sor installation has been modified
Your vehicle height is low or high due
to heavy loads, abnormal tire pres
-
sure, etc.
Rear view camera or the rear ultra
-
sonic sensor(s) is stained with foreign
material, such as snow, dirt, etc.
The pattern on the road is mistaken
for a pedestrian

Table of Contents

Other manuals for Kia EV6

Related product manuals