63
7
7
Driver assistance guide Smart Cruise Control (SCC)
Decreasing set speed
僅 Push the (-) switch down and release
it immediately. The set speed will
decrease by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push the (-) switch down and hold it.
The set speed will decrease by 10 km/
h (5 mph) each time the switch is
operated in this manner.
You can decrease the set speed to 30
km/h (20 mph).
Temporarily canceling Smart
Cruise Control
Press the ( ) switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
To resume Smart Cruise Control after
the function was canceled, operate the
(+), (-) or ( ) switch.
If you push the (+) switch up or (-) switch
down, the set speed will be set to the
current speed on the cluster.
If you press the ( ) switch, vehicle
speed will resume to the preset speed.
Check the driving condition before using
the ( ) switch. Driving speed may
sharply increase or decrease when you
press the ( ) switch.
Turning off Smart Cruise Control
Press the Driving Assist button to turn
Smart Cruise Control off.
If your vehicle is equipped with Manual
Speed Limit Assist, press and hold the
Driving Assist button to turn off Smart
Cruise Control. However, Manual Speed
Limit Assist will turn on.
Do not use the switches and buttons at
the same time. Smart Cruise Control
may not operate properly.
Smart Cruise Control display and
control
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to "LCD
display modes" on page 5-92.
To Next Page
Loading...
