INTAKE AND EXHAUST SYSTEM EMA -101
[LHSIDEORBANK2]
1. Remove the engine oil level gauge.
2. Remvoe the batter y assembly(A).
A
SBLM16008L
3. Remove the LH exhaust manifold heat protector.
CAUTION
Handle the heat protector with caution not to be
deformed.
4. Remove the LH cooling pipe(A).
A
SBLM16120L
5. Remove the automatic transaxle fluid oil level gauge.
6. Disconnect the oil pressure switch harness connector
and the batter y ground line.
7. After removing the under cover, disconnect the ex-
haust manifolds from the front muffler.
8. Remove the LH exhaust m a nifold.
9. To install, reverse the removal procedure.
To Next Page
Loading...