INTAKE AND EXHAUST SYSTEM EMA -95
REPLACEMENT E6783A17
1. Removetheenginecover.
A
SBLM16001L
2. Remove the engine room resonator(A).
A
SBLM16003L
3. After disconnecting the MAF sensor connector(A) and
the breather hose(B), remove the air cleaner assem-
bly(C).
C
A
B
SBLM16002L
4. Disconnect the other breather hose(A), the Purge
Control Solenoid Valve(PCSV) hose, the Positive
Crankcase Ventilation (PCV) hose(C) and the Elec-
tronic Throttle Control(ETC) cooling hoses(D) and
connector(E).
D
E
C
SBLM16208L
A
SBLM16005L
5. Removethewiringoverthesurgetank.
1) Disconnect the injection harness connector(A).
2) Disconnect the camshaft position sensor(CMP)
harness connector(B).
3) Disconnect the ground line(C).
4) Disconnect the ignition coil har ness connec-
tor(D).
5) Disconnect the condensor con
nector(E).
6) Disconnect the variable induction system(VIS)
solenoid valve connector(G).
7) Disconnect the oil control valve(OCV) har ness
connector(F).
To Next Page
Loading...