Kia G6DB-3.3 - Water Temperature Control Assembly Installation

COOLING SYSTEM EMA -83
WATER TEMPERATURE CONT ROL ASSEMBLY
NOTE
Make clean the contact face before assembly.
1. Install water temperature control assembly(A) and
new gasket.
Tightening torque
19.6 ~ 23.52Nm (2.0 ~ 2.4kgf.m, 14.5 ~ 17.36lb-ft)
A
SBL
M16204L
NOTE
Use
new O-rings(C) when reassembling.
2. Connect water hoses to the water temperature control
assembly.
3. Install the fuel pipe(A).
A
S
BLM16015L
4. Connect WTS connector.
5. Connect the RH/LH cooling pipes(A, B).
A
SBLM16115L
B
SBLM16116L
6. Install the battery assembly(A).
A
SBLM16008L
www.CarGarage.ir
www.CarGarage.ir
www.CarGarage.ir