COOLING SYSTEM EMA -79
B
C
SBLM16024L
6. Remove the radiator from the condensor by removing
bolts.(Refer to Condensor in HA Group).
7. Remove the cooling fan shroud(A) after disconnecting
cooling fan harness connector(B) and loosening the
mounting bolts(C).
B
A
C
SBLM16025L
8. Remove the radiator assembly.
WATER TEMPERATURE C ON TROL ASSEMBLY
1. Drain the engine coolant.
2. Remove air cleaner assembly.
3. Remove the automatic transaxle oil gauge.
4. Remove the battery as se mbly(A).
A
SBLM16008L
5. Disconnect the RH/LH cooling pipes(A, B).
A
SBLM16115L
To Next Page
Loading...