EMA - 18 ENGINE MECHANICAL SYSTEM
ENGINE
AND TRANSAXLE
ASSEM
BLY
REMOVAL E31DBAFC
CAUTION
• Use fe
nder covers to avoid damaging painted
surfa
ces.
• To avo
id damage, unplug the wiring connec-
tors c
arefully while holding the connector
porti
on.
NOTE
• Mark all wiring and hoses to avoid misconnec-
tion.
• Turn the crankshaft pulley so that the No.1 piston
is at top dead center.
1. Removetheenginecover(A).
A
SBLM16001L
2. Re
cover refrigerant by opening the high ＆ low pres-
su
re pipe caps and connecting the refr igerant sta-
ti
on(Refer to Air conditioning system in HA Group).
3. Remove the under cover(A).
A
SBLM16016L
4. Drain engine oil, transaxle fluid and engine coolant.
5. Disconnect the neagative terminal from the battery
and remove the batter y(A).
6. Remove the intake air hose and air cleaner assembly.
1) Disconnect the MAF connector(A).
2) Disconnect the breather hose(B) from air cleaner
hose.
3) Remove the intake a ir hose and air cleaner as-
sembly(C) with the resonato r(D).
D
C
A
B
SBLM16113L
To Next Page
Loading...