EMA - 84 ENGINE MECHANICAL SYSTEM
7. Install the automatic transaxle oil gauge.
8. Install air cleaner assembly.
9. Fill with engine coolant.
10. S tart engine and check for leaks.
11. Recheck engine coolant level.
THERMOSTAT
1. Place ther mostat in thermostat housing.
1) Install the ther mostat with the jiggle valve up-
ward.
2) Install a new thermostat(B).
A
B
SBLM16026L
2. Install water inlet(A).
Tightening torque
16.66 ~ 19.60Nm (1.7 ~ 2.0kgf.m, 12.30 ~ 14.47lb-ft)
3. Fill with engine coolant.
4. Start en g ine and check for leak s.
To Next Page
Loading...