EMA - 82 ENGINE MECHANICAL SYSTEM
INSTALLATION EF D4FF C4
WATER PUMP
1. Install the water pump(A) and a new gasket(1, 2) with
12 bolts.
Tightening torque
21.56 ~ 23.52Nm (2.2 ~ 2.4kgf.m, 15.91 ~ 17.36lb-ft)
9.80 ~ 1 1.76Nm (1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)
A
B
12
SBLM16205L
NOTE
• Make clean the contact face before assembly.
• When replacing a water pump, always use new
gasket(1, 2 ).
• When reassembling a water pump, replace the
bolt(B) with a new one.
2. Install the 4 bolts and pump pulley(A).
Tig
htening torque
7.8
4 ~ 9.80Nm (0.8 ~ 1.0kgf.m, 5.7 8 ~ 7.23lb-ft)
A
KDRF107A
3. Install drive belt(A).
A
SBLM16101L
4. Fill with engine coolant.
5. Start en g ine and check for leak s.
6. Recheck engine coolant level.
To Next Page
Loading...