EMA - 56 ENGINE MECHANICAL SYSTEM
REMOVAL E4DADBA3
CAUTION
• Use fender covers to avoid damaging painted
surfaces.
• To avoid damage, unplug the wiring connec-
tors carefully while holding the connector
portion.
NOTE
• Mark all wiring and hoses to avoid misconnec-
tion.
• Inspectio n the timing belt b efore removing the
cylinder head.
• Turn the crankshaft pulley so that the No.1 piston
is at top dead center.
1. Remove exhaust manifold.
2. Remove intake manifold.
3. Remove timing chain.
4. Remove water temperature control assembly.
5. Remove cylinder head.
6. Remove oil pump.
7. Remove oil filter assembly.
8. Remove A/C compressor(A) from engine.
A
SBLM16103L
9. Remove alternator(A) from engine.
A
KDRF104A
10. Remove power steering pump(A) from engine.
A
KDRF102A
To Next Page
Loading...