25
8
8
Maintenance Wiper blades
僅 Install the new blade assembly.
5. Type B (if equipped)
僅 Raise the wiper arm and turn the
wiper blade assembly to expose the
plastic locking clip.
僅 Compress the clip and slide the
blade assembly downward.
僅 Lift it off the arm.
僅 Install the blade assembly in the
reverse order of removal.
6. Return the wiper arm on the wind
-
shield.
7. Turn the vehicle on and wiper arms
will return to the normal operating
position.
Wiper arms
僅Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.
僅 Do not pull the wiper arm forward,
since arm could chip hood paint.
To Next Page
Loading...
