SRA Smart Reflow Analyzer Hardware Guide SRA-330200-000
12
Wireless Mode
1. Launch Profiling Software 2G. Your Profiling
Software USB Security Dongle is required to
use all features in the software.
2. Use the communication cable to connect the
SRA to a USB port on the computer.
3. A message appears confirming the SRA is
detected.
4. From the Main screen, click on the Globe button
to display the Global Preferences screen.
5. The software shows the SRA as detected in the
Profiling Hardware panel and displays radio
button choices for specifying the communication
mode.
To Next Page
Loading...
