Kidde VM-1R User Manual

Notication
Appliances
Hazardous Location
Devices
Door Holders
& Relays
Initiating
Devices
VM Series
Head End
7
SUBMIT

VS Series
VM
Head End
SERIES
Option Cards
Ethernet Adapter Cards
VM-CPU
Main Board
VM-ETHx
The VM-CPU supports one of the following three adapter cards...
VM-ETH1 Ethernet Adapter Card
The VM-ETH1 adapter card provides a standard 10/100 Base-T Ethernet network
connection for panel programming and diagnostics.
VM-ETH1 Ethernet Adapter for programming and diagnostics remotely. Data Sheet K85005-0133
VM-ETH2 Ethernet Adapter Card
The VN-ETH2 adapter card provides all the function of the VM-ETH1 plus the added capability of communicating to
compatible digital alarm receivers. Please refer to the VM UL Compatibility List for the latest compatible receivers.
VM-ETH2 Ethernet Adapter for Digital Alarm Recievers, programming, and diagnostics. Data Sheet K85005-0133
VM-ETH3 Ethernet Adapter Card
The VM-ETH3 adapter card provides all the function of the VM-ETH2 plus the added capability of sending email mes-
sages as well as SMS text messages by means of email-to-text.
VM-ETH3 Ethernet Adapter for email, Digital Alarm Recievers, programming, and diagnostics. Data Sheet K85005-0133
VM-DACT Dual Line Dialer Card
The VM-DACT Dual Line Dialer Card provides dialer communications between the VM-1
control panel and remote locations over telephone lines. Alarm, supervisory, and trouble
information is transmitted to the remote site using one or two telephone lines in dual or
split format to any desired receiver.
VM-DACT Dialer, dual line Data Sheet K85005-0133
CLA-PS10 Class A Adapter Card
PS10-4B
Power
supply
CLA-PS10
Class A
Adapter Card
The CLA-PS10 Class A Adapter Card converts the four Class B notication appliance/auxil-
iary power circuits on the PS10-4B power supply card to Class A. For notication appliance
circuits only.
CLA-PS10 Class A Adapter, PS10 NACs. Data Sheet K85005-0133
VM-SLCXB Signaling Line Loop Expansion Card
B
+−
LOO
P
2
2
B
H
S
A
+
−
LO
OP2
A
B
+
−
L
O
OP2
B
M
K
S
W
R
P
The VM-SLCXB Signaling Line Loop Controller Expansion Card provides up to two Class A, Class X
or Class B data circuits for V-Series detectors and GSA modules. The VM-SLCXB includes one pre-
installed VM-SLC signaling line circuit card. A second VM-SLC card (ordered separately) can be added
to provide an additional device loop.
VM-SLCXB Signaling Line Loop Controller Expansion Card. Data Sheet K85005-0133
VM-SLC Signaling Line Circuit Card. Data Sheet K85005-0133
VM-SLC-HC High Capacity SLC Card for circuits with more than 90 isolators. Data Sheet K85005-0133

Kidde VM-1R Specifications

General

Brand	Kidde
Model	VM-1R
Category	Control Panel
Language	English