Kidde VS1 User Manual

Chapter 2: Front panel programming
P/N 3102351-EN • REV 005 • ISS 28DEC18 45
Active > NET (1-8): No
Active > CID: 110
Alarm verify > Printer: Yes
Alarm verify > Dialer: None
Alarm verify > NET (1-8): None
Alarm verify > CID: 118
Disable > Printer: Yes
Disable > Dialer: Acct 1
Disable > NET (1-8): No
Disable > CID: 570
Maintenance Alert > Printer: Yes
Maintenance Alert > Dialer: Acct 1
Maintenance Alert > NET (1-8): No
Maintenance Alert > CID: 393
Pre alarm > Printer: Yes
Pre alarm > Dialer: None
Pre alarm > (1-8): No
Test > Printer: Yes
Test > Dialer: Acct 1
Test > NET (1-8): No
Test > CID: 614
Trouble > Printer: Yes
Trouble > Dialer: Acct 1
Trouble > NET (1-8): No
Trouble > CID: 373
Active3 > Printer: Yes [1]
Active3 > Dialer: Acct 1
Active3 > NET (1-8): No
Active3 > CID: 200
Correlation Groups
Primary Sensor > Group: 001
Primary Sensor > Status: Excluded
Secondary Sensor > Group: 001
Secondary Sensor > Status: Excluded
Base > Group: 001
Base > Status: Excluded
Base type: Standard
Follow: Head
Latched: No
Type: Heat alarm
Primary and secondary text may vary based on
device type.
•
Zone Secondary: Off
•
Mapping: No
•
Loop 2 enable: No
•
Loop 2 Fst Grp: 1 to 25
•
Loop 3 enable: No
•
Loop 3 Fst Grp: 1 to 25
•
Loop 4 enable: No
• Loop 4 Fst Grp: 1 to 25
[1] Active3 is an activation from a COD device, or an activation from the secondary element of a dual element
detector (single address), such as PCOS/PCD, HCD, or PHCD. See “Device type descriptions” on page 49.

Kidde VS1 Specifications

General

Brand	Kidde
Model	VS1
Category	Fire Alarms
Language	English