Kidde VS1 - Chapter 2 Front panel programming

P/N 3102351-EN • REV 005 • ISS 28DEC18 33
Chapter 2
Front panel programming
Summary
This chapter shows how to configure the system using the control buttons on the front panel.
For information on programming the system using the optional Configuration Utility (CU), refer
to the Help available in the CU.
The panel user interface is the primary interface of the fire alarm system.
Content
UL/ULC programming requirements 35
Getting started 37
What is a zone? 37
What is a correlation group? 37
What is in-suite signal silence? 39
Programming modes 40
Using the programming control buttons 41
Passwords 41
Factory default settings 42
Device type descriptions 49
Displaying the Program menu 59
Setting the time and date 59
Setting daylight saving time 60
Sample values for daylight saving time 60
Changing the passwords 61
Restoring the factory default settings 61
Setting up the programmable keys 62
Clearing the event history log 65
Updating the firmware 66
Restarting the panel 67
Enabling RS-232 communication 67
Auto programming the panel 68
Auto programming options 68