PMC-A 57
5
External Control
Table 5-2 Tools and parts needed for assembly
Fig. 5-2 J2 connector and plug assembly
Name Model
Socket XG5M-2632-N (accessory)
Recommended wire size: AWG24 (UL-
1061)
Contact XG5W-0031 (accessory)
Recommended wire size: AWG24 (UL-
1061)
Single contact
connection tool
XY2B-7006
Contact removal
tool
XY2E-0001
Semi-cover XG5S-1301 (2 pieces used)
J
1
J
2
KIKUSUI
ELECTRONICS
CORP.
1
2
3
2
1
25
26
Polarity Slot
Plug with polarity guide
㧖In case the external control function is used by
14-pins connector, connect the J2 connector
(26-pins) matching the polarity slot against
the polarity guide of the 14-pins plug.
ޓ
Polarity Guide
㧖In case the J2 connector is not used, attach the
remote control plug which comes with a standard
accessory.
ޓ
To Next Page