Version 1.1 © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
HD Video Encoders · User Manual
If the platform requires user name and password verification, you also need to fill in the corresponding
parameters in the encoder.
3) On YouTube platform, if the video can be displayed, the push stream is successful; otherwise you
need to check the network and other configurations.
Note: In the case of RTMPS push mode, fill in RTMPS URL at Push point and set ‘Use old RTMP
version’ to yes, so that it can be supported.
To Next Page
Loading...
Need help?
General
