Kinefinity TERRA 4K - Default Settings

TERRA 4K Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 10 / 60
1.4 Default Settings
The list below is the default setting of TERRA:
Type
Name
Default
Type
Name
Default
Shooting
Image Format
sub S35
Settings
SSD System Format
HFS
Resolution
4K 4096*2160
Time Code
Free Run
Sensor FPS
25fps
ND set
0.03
Project FPS
25fps
WIFI Power
ON
Shutter
1/50s
Threshold Voltage
13.3V
ISO
ISO 800
Language
English
Highlight Stops
4.3
Start Display
Brief
Color Temperature
5600K Daylight
Fan Speed
40%
LUT
KC_NEUT
Fan Stop
Never
Codec
ProRes 422HQ
Clip End
Loop
Active Mount
Enhanced
SYNC
Tally Lamp
ON
Project Blanking
None
Beeper
ON
Liveview
Video Output FPS
60P
Audio
MIC Level
30dB
Waveform
LUT
Playback/Monitoring
Level
0dB
Zebra Pattern
90%
KineAudio
OFF
Color Temperature List
Brief
Phantom 48V
OFF
Shutter Mode
Time
KineAudio Source
CH1/CH2
Anamorphic Lens
None
KineAudio Level
30dB
NOTE When the camera is powered with an e-ND adapter attached, default value will be 0.6 (2 stops).
How to restore to factory settings:
[Configuration System Factory Reset]
NOTE When the camera is powered with a USB storage device plugged in before powering the camera,
it will automatically revert to factory settings while booting.