TERRA 4K Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 33 / 60
3.7.3 Camera Fan and Core Temperature
Core Temperature is the real-time temperature of core processor, not the
body temperature. It is shown in the Liveview and bottom of Configuration
menu, so that users can monitor it. For TERRA, if the core temperature
reaches up to 80 degrees, the temperature indicator turns into yellow; up to
90 degrees, indicator turns red, camera needs to be cooled down or even
turned off for safety, else it may bring permanent damage to camera body.
Two fans inside the camera:
Core Fan: cools the Core Processor; the fan runs quietly for most of
time, and can NOT be set manually;
Body Fan: cools the whole camera body, can be set manually.
You can adjust the body fan speed (factory set: 40%) from 30% to 100% or
even turn off:
[ConfigurationSettingsFan Speed].
Besides, you can choose to stop the Body Fan while recording, and there will
be less noise; the fan will be turned on automatically when stop recording:
[ConfigurationSettingsFan Stop].
Menu Operation
Change Fan Speed
[ConfigurationSystem
SettingsFan Speed]
Manu Operation
Stop Fan
[ConfigurationSystem
SettingsFan Stop]
To Next Page
Loading...