TERRA 4K Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 41 / 60
12. Black screen after upgrading failure:
Please try to enter into Calibration Mode: hold configuration button when press and release power
button, after three seconds, release configuration button. You can also upgrade the firmware under
this mode. But if you can not enter into calibrtation mode, please contact us by sales@kinefinity.com,
or contact your local dealer.
13. Recover the footage due to power failure:
Power failure during shooting may damage the currect footage, and footage can not be played back
in camera or computer. For ProRes footage, please use the method below. Please work in Windows
and that Quicktime 7 is installed. Download KineRecovery.zip to your PC, and then:
1. Copy files: unzip the file and copy KineRecovery.exe and QTCF.dll to the folder of footage, like PRJ-
0002-003-A2_5D8A;
2. Run: run the KineRecovery.exe to start the recovery;
3. Complete: the recovered mov file will be generated in the footage folder, name starting with “r”.
For more questions, please visit TERRA FAQ on official website.
To Next Page
Loading...