Kinetico Essential Series - Page 16

Essential Series Gold and Platinum
16
25. Remove control disc 26. Remove level 1 27. Remove level 3 seal
28. Separate level 6, level 6 seal and re-
move check stem
29. Isolate level 3-4-5 assembly 30. Remove by-pass seat
Hold valve seat.
Unscrew
31. Separate level 3 from 4/5 and remove
level 3
32. Remove drain valve seat 33. Separate level 4 from level 5
Pull
34. Remove level 5 seal 35. Remove inlet and outlet seats 36. Remove inlet and outlet pistons
Unscrew
Unscrew
Hold Pistons
Pull