Installation / Mounting
Issue: 08/2012
» The projector is completely (with mounted lamphouse (up to 2000 W), without
lamphouse (2000 W - 7000 W) mounted on a pallet and secured with screws.
» With delivery to countries over-seas the projector secured on the pallet is packed in a
wooden crate.
» The accessories are packed into a box or into the wooden crate too.
» Weight (gross): about 400 kg (882 lbs)
If the projector is stored for a longer time:
» Only store in dry rooms.
» Choose a suitable protective cover or leave projector in the original cover.
X
Although most parts are delivered with a protective cover, you have to clean the
projector and its components before the rst start.
» Projector FP 50 E
- with take-up friction drive with extension arm and motor
- with take-off friction drive with extension arm
- with roller set for using with a rewind system (option)
» Lamphouse
- up to 2000 W
- up to 7000 W
» Reverse-scan sound device
- only analog, not upgradeable to Dolby Digital
- optical stereo analog, upgradeable to Dolby Digital
- optical stereo analog and Dolby Digital (option)
» Lens holder
- electronic focusing control (option)
» Lens turret (option)
- 2 lenses and manual lens change
- 2 lenses and automatic lens and aperture change
- electronic focusing control (option)
- 3 lenses and manual lens change
- 3 lenses automatic lens and aperture change
- electronic focusing control (option)
» Remote unit
- focusing control (option)
To Next Page
Loading...
