Kinoton FP 38 E Premiere - Single Aperture Plates (Only with Manual Lens Turret or Lens Holder); Aperture Changer (Option, Only with Electronic Lens Turret)


Issue: 08/2012

 
Push the single aperture plate into the lm gate until the stop is reached and the
aperture plate snaps into position.
 
The aperture changer is suitable for automatically changing the aperture when the
corresponding format key has been pressed. It works together with an electronically
controlled lens turret. By activating a format button the aperture together with the lens
is changed.
 Aperture changer
Á Aperture
 Drive pin
(with knurled nut installed)
• Push the aperture into the lm
gate and place the aperture
changer drive pin into the hole on
the aperture.
• Tighten the knurled nut on the
drive pin.
 Hole for drive pin
Á 1:1.66 aperture
 1:1.85 aperture
à 1:2.39 aperture
2
3
1
2
3
1
4