Components
Issue: 08/2012
The FP 50 E console projector is suitable to reproduce 35 mm lms and sound for-
mats in small, medium and large cinemas.
» The lm is transported through the projector from the top to the bottom.
» The projector head can be equipped with ange connected spool arms up to a
capacity of 2000 m. The take-up friction is driven via a toothed belt from the main
drive motor.
» The lm can also be guided via a set of guide rollers to and from the non-rewind
system.
» Depending on the requirement an automation system can be integrated in the
projector housing.
» In the housing there are also the xenon unit (two types) and the rectier.
» The reverse-scan sound device is directly mounted on projector head and is suit-
able to reproduce analog sound and digital sound DOLBY SR·D. Both sound for-
mats in shape of readers can be combined in one equipment.
» Optionally the projector can be equipped with DTS or SDDS reader (Sony). Both
readers can be attached on an extension arm at the top of the projector head.
» The projector head with frictions or/and set of guide rollers and sound device are
mounted on the console.
» Drives and motors are mounted in the projector head.
» The whole electrical equipment, the rectier, the xenon unit, the sound ampliers
and the automation systems can be mounted into the console.
» The projector can be equipped with two types of xenon units (1,000 to 2,000 W and
2,000 to 7,000 W).
» Two electrodes produce a light arc in a surrounding of pure xenon gas between
each other. The light arc will be reected via the mirror and lights through lm gate,
the lm and in result the screen.
» A rectier provides the xenon lamp with power.
To Next Page
Loading...
