CHAPTER 1 CK20(H)
1-8
S196-WOO Jul. 2003
To ensure safety and prevent damage to the machine
and surrounding equipment, heed the following pre-
cautions in handling electrical parts and wiring.
4. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING
196W112A
• Check electrical wiring for damage and loosened
connection every year. To this end, educate the
customer to do his or her own check and at the
same time recommend the dealer to perform pe-
riodic check for a fee.
• Do not attempt to modify or remodel any electri-
cal parts and wiring.
• When removing the battery cables, disconnect the
negative cable first. When installing the battery
cables, connect the positive cable first.
IMPORTANT
To Next Page
Loading...
