GENERAL
1-9
S196-WOO Jul. 2003
CK20
3C093
Liquid-cooled, 3-cylinder diesel
21 (15.7)
927 (56.6)
2,800
20 (5.28)
Dry type single stage
Standard
Wet disc type
1 speed (540 rpm at 2,646 engine rpm)
1 speed (2,000 rpm at 2,706 engine rpm)
29 (7.66)
Cat.I
503 (1,109)
Position control
Hydrostatic
6 ~- 12 (23 x 8.50 ~ 12, 23 x 8.50 ~ 12)
9.5 ~ 16 (33 x 12.5 x 16.5, 12 ~ 16.5)
2,684 (105.7)
1,121 (44.1)
1,970 (77.5)
1,470 (57.9)
310 (12.2)
910 (35.8)
890 ~ 935 (35.0 ~ 36.8)
2.3 (7.5)
HST
15.5 (11.6)
Hydrostatic
INF.2
Live continuous
0 ~ 14.97 (0 ~ 9.30)
0 ~ 9.37 (0 ~ 5.82)
904 (1,993)
MECHANICAL
16.5 (12.3)
Synchro/constant
6F 2R
Trans
1.10 ~ 16.24 (0.68 ~ 10.09)
1.36 ~ 6.31 (0.85 ~ 3.92)
890 (1,962)
Model
Type
Engine gross HP (kW)
P.T.O HP (kW)
Displacement cc (cu.in)
Rated revolution r.p.m min-1
Fuel tank capacity
(gal.)
Clutch
Transmission
Speeds
Differential lock
Brake
P.T.O
Rear (rpm)
Mid (rpm)
Pump capacity (Max. flow rate)
/min (gpm)
3-point hitch
Maximum lifting capacity (24in. aft of hitch)
kgf (lbs.)
Hydraulic lift control system
Steering
Front (AG, TURF, INDUSTRIAL)
Rear (AG, TURF, INDUSTRIAL)
Forward (At rated engine rpm) km/h (mph)
Reverse (At rated engine rpm) km/h (mph)
Overall length (with 3p) mm (in.)
Overall width (minimum tread) mm (in.)
Overall height (Top of ROPS) mm (in.)
Wheel base mm (in.)
Min. ground clearance mm (in.)
Tread Front mm (in.)
Rear mm (in.)
Min. turning radius (with brake) m (Ft.)
Weight (with ROPS) kgf (lbs.)
Engine
Drive train
Hydraulic
system
Standard
tire size
Traveling
speeds
Dimen-
sions
5. SPECIFICATIONS
Model
NOTE: The specifications are subject to change for the purpose of improvement without any notice.
To Next Page
Loading...
Need help?
General
