CHAPTER 1 CK20(H)
1-18
S196-WOO Jul. 2003
G. CHECKING BRAKE PEDALS AND CLUTCH
PEDAL
1. Examine the brake and clutch pedals for free travel,
and smooth operation.
2. Adjust if incorrect quantity is found:
(See “Adjusting Clutch and Brake Pedal” in every
100 hours maintenance.)
NOTE:
Brake pedals should be equal when depressed.
H. CHECKING GAUGES, METER AND EASY
CHECKER
1. Examine the instrument panel for broken gauge(s),
meter(s) and Easy Checker lamps.
2. Replace if broken.
I. CHECKING HEAD LIGHT, HAZARD LIGHT
ETC.
1. Inspect the lights for broken bulbs and lenses.
2. Replace when necessary.
J. CHECKING SEAT BELT AND ROPS
1. Always check condition of seat belt and ROPS at-
taching hardware before operating tractor.
2. Replace when necessary.