TO THE READER
7
S196-WOO Jul. 2003
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels.
4. If a component with danger, warning or caution label(s) is replaced, make sure new label(s) is (are) attached
in the same locations(s) as the replaced component.
5. Mount new labels by applying on a clean dry surface and pressing any bubbles to outside edge.
(6) Parts No. : T2445-50724
(5) Parts No. : T2325-50512(4) Parts No. : T2325-50743
(9) Parts No. : T2615-54112
(7) Parts No. : T2615-53561
(8) Parts No. : T2350-54141
To Next Page
Loading...
Need help?
General
