Kipor IG2000 - Carburetor and Stepping Motor Inspection

37
5. EXHAUST SYSTEM
Caution: Muffler removal/installation must be performed with the engine cold.
5.1 Muffler
Disassembly/Reassembly
后罩壳
消声器
消声器垫片
火星捕捉器
组装：
安装前用刷子等清
除积碳再安装。
组装：
安装前用橡胶锤轻
轻敲打除去内部积
碳，再安装
。
后罩壳密封条
安装有三元催化的
消声器标识符号
“T”
Muffler
Installation: remove the
carbon deposits by
lightly tapping with
a rubber hammer
Muffler gasket
Spark Arrestor
Installation: remove the
carbon deposit by
a brush
Seal strip of rear cover
Rear cover
Muffler mark “T”
© 2011 Kipor Power Systems, Inc.