Kipor IG2000 Shop Manual

75
12.5 Assembly of crankcase cover
1. Clean any remaining sealant on the cylinder block and crankcase cover with cloth.
2. Apply gasket sealant on the cylinder block sealing face, as shown.
3. Reassemble the crankcase cover in the opposite direction of disassembly.
Caution
Install the crankcase cover on the cylinder block within three minutes after applying sealant.
Revolve the crankshaft if necessary.
© 2011 Kipor Power Systems, Inc.

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)