Kipor IG2000 Shop Manual

25
4. MAINTENANCE
4.1 Maintenance schedule
Regular service period(1)
Each use
First
month or
20 Hrs.
Every 3
months or
50Hrs.
Every 6
months or
100 Hrs.
Every
year or
300 Hrs.
Item perform at every indicated
month or operating hour interval,
whichever comes first
Engine Oil
Check ●
Replace ● ●
Air filter
Check ●
Clean ●②
Spark plug Clean-Adjust ●
Spark catcher Clean-Adjust ●
Valve clearance Check-Adjust ●③
Fuel tank and filter Clean ●③
Fuel line Check Every 2 year (Replace if necessary)
Note:
(1) For commercial use, operation hours are determined by proper maintenance.
(2) Service more frequently when operating in dusty areas.
(3) Service by an authorized Kipor service center.
■ Checking the oil level
Stop the engine and check the oil level, be sure to put the engine on a flat floor when checking.
1. Loosen the screws of the maintenance cover and remove the cover.
2. Remove the oil filler cap and check for the oil level.
3. If the oil level is low, add to the edge of the oil fill port.
© 2011 Kipor Power Systems, Inc.

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)