26
维修盖
螺钉
上液面
机油尺
加油口
上限位
下限位
■ Replace the engine oil
1. Disassemble the oil dipstick and oil drain bolt, drain used oil.
2. Tighten the oil drain bolt..
3. Refill with clean oil. (Oil capacity is 0.4L)
※ Recommended oil: SAE10W-30 or SAE30, API Service Classification SE, SF or SG.
4. Check the oil level; fill to the upper limit level if necessary.
5. Tighten the oil dipstick.
■ Please dispose of the used motor oil in a manner that is compatible with the environment. We
suggest you take used oil in a sealed container to your local recycling center or service station for
reclamation. Do not throw it in the trash; pour it on the ground, or down a drain.
■ Drain the used oil while the engine is warm. Warm oil drains quickly and completely.
Maintenance cover
Cover screw
Oil dipstick
Oil fill port
Upper limit
Lower limit
Upper level
To Next Page
Loading...
