SAFETY
It is assumed that your safety department has established a
program of safety based upon a thorough analysis of industrial
hazards. Before installing and operating or performing
maintenance on the equipment described in this Manual, it is
suggested that you again review this program to be certain that it
covers the hazards arising from high speed rotating machinery.
It is also important that due consideration is given to those
hazards which arise from the presence of electrical power, hot oil,
high pressure, high temperature, toxic and flammable liquids,
and gases etc. Proper installation and care of protective guards,
shutdown devices and over pressure protection should also be
considered for essential parts of any safety program.
Also essential are special precautionary measures to prevent the
possibility of applying power to the machine at any time when
maintenance work is in progress. The prevention of rotation due
to reverse flow in dynamic machinery should not be overlooked.
Design of refrigerant system and plant should abide with directive
principles, standards, ordinance regulatory rules and laws
established by state/local authorities. This is in view of safety and
functionality of plant operation as well as essential health and
environment safety for society mankind.
In general, you should be guided by all basic safety rules
associated with the equipment and the process.
IMPORTANT
To Next Page
Loading...
Need help?
General
