Before hauling/moving of compressor consider its weight given
in manual/brochure provided along with compressor.
Select correct size/type of lifting tackles like slings, wire ropes,
shackles, rings, etc. (refer selection guidelines provided by such
tools manufacturers).
Tie the compressor at proper location as shown in sketch with
lifting tackles, balance the compressor at its CG and natural
position (do not lift in tilted condition). Lift the compressor to just
adequate height above the ground level for moving. See, check,
give alert to the workmen around the work area that hauling of
compressor is being started.
In short, take all necessary precautions to avoid any sort of
accident or damage in work place.
It is mandatory to follow directive principles, ordinance and
regulatory laws established by state/local authorities, in view of
safety and functionality of work environment.
LIFTING AND HAULING OF COMPRESSOR
To Next Page
Loading...
Need help?
General
