HANDLING
UNPACKING :
KIRLOSKAR PNEUMATIC
CO. LTD.
LIFTING AND HANDLING :
STORAGE :
Remove the crating and boxes and account for all the items
shown on the shipping/packing list. Make sure that there are no
missing or damaged parts. Handle all the parts carefully. If the
equipment is damaged during transportation/shipment, contact
immediately the transporter and also
Lifting and handling of compressor must be planned as per the
facilities available at the installation site. Caution must be
exercised such that no compressor parts come in contact with the
lifting ropes. Use lifting sling whenever required.Refer next page
on “Lifting and Hauling of Compressors”.
Store the compressor indoors whenever possible. Keep the
storage area clean, dry and free from extreme temperature
conditions. A rust preventive is applied to the compressor parts
before shipment. The protective effectiveness of this rust
preventive is significantly affected by the conditions encountered
during an outdoor storage. Precautions must be observed in
case of an outdoor storage such that the equipment is not
subjected to extreme conditions of temperature, corrosive
environment and excessive moisture.
If the compressor is to be stored for a long time after receipt
at site, please refer instructions on “Preservation of
Refrigeration Compressor” in this manual.
IMPORTANT
To Next Page
Loading...
Need help?
General
