6
INSTALLATION
INSTALLATION
STEP 1: Mount the Installation Brackets
Identify the brackets for your shade.
Installation Overview
To install your shade, you will need to perform the following five steps:
STEP 1: Mount the Installation Brackets
STEP 2: Install the Battery Wand (If Applicable)
STEP 3: Install the Shade
STEP 4: Connect the Power Source
■
Installation Brackets for Standard Shades. An installation
bracket is placed at each end of the standard roller shade.
There are two sizes M and L.
■
Installation Brackets for Cassette Shades. The number of
installation brackets required varies depending on the shade
width, as shown in thetable.
Cassette
Installation
Bracket
■
Installation Brackets for Fascia Shades. An installation
bracket is placed at each end of the fascia.
Fascia
Brackets
■
Dual Roller Brackets. An installation bracket is placed at each
end of the dual roller shade.
Dual
Roller
Brackets
Shade Width Brackets Required
Up to 36" 2
361/8" – 66" 3
661/8" – 90" 4
901/8" – 120" 5
To Next Page
Loading...