4-12
g) Disconnect gas line tting from standard
burner.
h) Remove igniter from standard burner
(see removing a spark igniter from
standard or crown burner 4-9).
i) Turn burner assembly upside down on
protected surface.
j) Remove 2 screws from bottom of
standard burner attaching it to burner
support.
Mounting Screws
Gas Line Fitting
4. To remove crown burner from
cooktop.
a) Remove igniter from crown burner (see
removing a spark igniter from standard
or crown burner 4-9).
b) Remove crown burner from burner
assembly.
Mounting Screws
Mounting Screws
f) Lift burner assembly out of burner
box.
Burner Assembly
To Next Page
Loading...
