2-12
Option 4: No waste disposer, no drain air
gap
A. Drain hose connector
B. Cut drain connector
C. Waste
B
C
A
NOTE: Attach the drain hose connector to
the water waste line using the supplied hose
clamp.
6. Turn on water and check for leaks.
Make Electrical Connection
Electrical Shock Hazard
Disconnect electrical power at the fuse
box or circuit breaker box before in-
stalling dishwasher.
Failure to do so can result in death or
electrical shock.
1. Remove screw securing the electrical box
cover. Remove cover.
2. Route electrical wires through strain relief
and secure to electrical plate.
To Next Page
Loading...
Need help?
General
