2
This Instruction Manual is intended for those operating the KITO model CX chain hoist. Separate document;
Disassembly/Reassembly Manual is also available for the relevant person (Note). Please contact KITO or your dealer
for the material.
Note : A person who is authorized by the business entity as having thorough knowledge and expertise on the
structure and devices of a chain hoist, or a person with similar thorough knowledge and expertise and capable of
understanding periodic inspection, and Disassembly/Reassembly Manual.
When these conditions are not satisfied, consult KITO or your dealer, or request maintenance.
Introduction
- Reproduction of this document, in whole or in part, without prior consent is prohibited.
- This document is subject to change without prior notice.
- This document was prepared with the utmost care. However, the customer is kindly requested to inform us of
any question, error or unclear point included in the document.
This manual chain hoist is designed and manufactured to lift and lower a load manually within a normal work
environment. Movement in the horizontal direction is also enabled by combining with a trolley.
Intended Purpose
Table of Contents
Introduction ........................................................................................................ 2
Intended Purpose .............................................................................................. 2
Safety precautions ............................................................................................ 3
Chapter 1 Operation ......................................................................................... 5
Chapter 2 Inspection ...................................................................................... 17
Chapter 3 Troubleshooting ............................................................................ 33
WARRANTY ...................................................................................................... 40
To Next Page
Loading...
