29
■
Operation
■
General
• Do not operate the electric chain hoist in an environment with flammable or explosive gas.
The electric chain hoist is not designed as explosion proof specification.
• Do not use the electric chain hoist exceeding the ratings (intermittent rating) of the
lifting motor and the maximum start-up frequency.
• Do not use the electric chain hoist by the voltage other than the rated voltage.
• Do not use the Emergency Stop Button for ordinary stop operation.
• Do not expose the Load Chain to sparks from welding.
• Do not contact welding rods or electrodes with the Load Chain.
• Do not use the Load Chain as the earth for welding work. (Fig. A)
Failure to comply with these instructions may result in death or serious injury.
Prohibited
A
• Follow the operating environment and conditions for the electric chain hoist.
Failure to comply with this instruction may result in death or serious injury.
Mandatory
■
Slinging
• Do not apply a load to the tip of the Bottom Hook or the Hook Latch. (Fig. B)
• Do not bind a load with the Load Chain directly. (Fig. C)
• Do not operate the Load Chain while it is in
contact with any sharp edges. (Fig. D)
Failure to comply with these instructions may result in
death or serious injury.
Prohibited
• Use the sling appropriate for the weight and shape of a load.
Inappropriate slinging may result in danger such as drop of a lifted load.
• Carry out the slinging with equal load on slinging devices for stable lifting of a load.
• Attach the slinging devices securely to a load.
• Attach the slinging devices to the Bottom Hook correctly.
Failure to comply with these instructions may result in death or serious injury.
Mandatory
CB D
How to Use Operation
1
(to be continued)
DANGER
DANGER
To Next Page
Loading...
Need help?
General
