KITO EQ series User Manual

34
Chapter 1 Handling the Product
Work Flow of Assembling and Installation
The contents of the work to assemble and install the product by the maintenance engineers and installer are described
from this page and after. To eliminate the redo work and for effective assembling and installation, please check the
following work flow first and then start assembling and installation work.
Model Check
AssemblingInstallation
Check after Installation
Suspended Type (hoist only) Trolley Type
Installation of Suspended Type (hoist only) (P53) Installation of Trolley Combined Model (P54 to 56)
Assembling Parts to Electric Chain Hoist (P35)
Checking Power and Power Cables (P48)
Combination with the Motorized Trolley (P38) Combination with the Manual Trolley (P43)
Motorized Trolley Type Manual Trolley Type
Connecting Cables Connecting Cables Connecting Cables
Preparation
Mounting the Chain Container
Lubrication on the Load Chain
Checking gear oil
Connecting Power Cable to the power
Mounting the Hoist to the Travel Rail
Mounting the Stopper
Power Cable Layout for Motorized/Manual trolley type

Case for cable hanger

Case for T-shape/angle type hanger
Connecting Power Cable
to the power
Checking installation method
and place
125kg to 1t

Connecting the Relay Cable

Connecting the Trolley Power Cable

Connecting the Trolley Push Button Cord
125kg to 1t

Connecting the Power Cable

Connecting the Push Button Switch Cord
Checking the power

Checking the breaker ratings
Checking the Power Cable

Permissible cable length and size
Checking and Carrying Out “Check Items” (P57)
EQM
EQ
EQSG/EQSP
Carrying Out Operational Check (P57)
Motorized Trolley Type (P51)
125kg to 1t

Connecting the Power Cable

Connecting Push Button Switch Set Cord
Suspended Model (hoist only) (P50) Manual Trolley Type (P52)
 Part replacement of the electric chain hoist
Checking the rail width of the motorized
trolley
Checking the number and position of
adjusting spacers
Combination of the electric chain hoist and
the motorized trolley
Mounting the balance weight

Part replacement of the electric chain hoist
Checking the rail width of the manual trolley
Checking the number and position of
adjusting spacers
Combination of the electric chain hoist and
the manual trolley
1
Work Flow of Assembling and Installation

KITO EQ series Specifications

General

Brand	KITO
Model	EQ series
Category	Chain Hoists
Language	English