KITO EQ series User Manual

72
Chapter 2 Inspection
Periodic Inspection (continued)
■
Peripheral parts of the Body size
Item Check method Criteria When failed
Number of
start
• Check the number of start
with the CH Meter.
• Number of start must not exceed the
guidelines for replacement.
Replace the Suspension
Eye and Bottom Hook.
Item Check method Criteria When failed
Chain
Guide
• Check visually. • To have no apparent abrasion, deformation
and damage
• TohavenoawduetohittingbytheLoad
Chain
• The flaw due to hitting is caused
by wrong use such as lifting a
load in an inclined direction. If
the abrasion is observed on the
Chain Guide, the Load Chain
may be worn also. Refer to the
item of Load Chain Abrasion and
check the abrasion.
Neglecting the check of the Load
Chain abrasion may result in bodily
injury or property damage.
CAUTION
Mandatory
Replace the Chain
Guide.
■
Electric Chain Hoist (EQ) Periodic Inspection
■
Suspension Eye, Bottom Hook
Electric Chain Hoist (EQ) Periodic Inspection Periodic Inspection
2
Chain Guide

KITO EQ series Specifications

General

Brand	KITO
Model	EQ series
Category	Chain Hoists
Language	English