KITO ER2 - Daily Inspection of Electric Chain Hoist (Hook Suspended Type)

20
How to use (continued)
■
Daily Inspection of Electric Chain Hoist (Hook Suspended Type)
Chapter 1 Handling the Product
• Carry out daily inspection before use.
(When any abnormality was found during inspection, turn off the power, indicate “FAILURE" and ask the maintenance
engineer for repair.)
Neglecting to carry out daily inspection may result in death or serious injury.
Mandatory
■
Appearance
Item Check method Criteria When failed
Indication of
nameplates
and labels
• Check visually. • No peel off. Indication can be seen clearly. Carry out cleaning, repair
or replace with new
nameplate or label.
When replacing with a
new nameplate or label
is required, please inform
KITO of the description
in “Record of the Product
No." (P17) such as Lot
No. and Serial No.
Deformation
and damage
of body size
and each part
• Check visually. • Noapparentdeformation,damage,awand
crack
Replace the parts with
deformation, damage,
flaw or crack.
Loosened
or fallen off
bolts, nuts
and split pins
• Check visually or using
tools.
• Bolts, nuts and split pins are fastened
securely.
• Even fallen off of a bolt causes
for the body size to drop. Be
sure to check.
Fallen off of a bolt may result in death
or serious injury.
Mandatory
DANGER
Fasten bolts, nuts and
split pins securely.
Body
Fan cover
Motor frame
Gear case
Controller cover
●
Refer to the technical material attached in Appendix (P122) for the structure of the product and the name
of each part.
1
How to UseDaily Inspection of Electric Chain Hoist (Hook Suspended Type)
DANGER