OIL CONDENSING BOILER
INSTALLATION AND USER MANUAL
INSTALLATION & USER MANUAL www.krb.co.kr
7
1. Warranty terms and conditions
1.1. General precautions
Installation, electric wiring, commissioning and maintenance works must be carried
out by qualified personnel.
Boiler installation work must be carried out in compliance with the national or
regional laws and regulations.
This manual provides for the installation, setting, operation and maintenance of the
product in addition to basic information.
It is prohibited to operate this product by any person who comes under any one of
the followings: children having limited physical, sensible or mental capacity, persons
without knowledge about the product and not trained to operate the point of
departure form a safety supervisor.
The instructions provided in this manual must be observed to use the product and
installed electronic devices correctively and to prevent safety accident.
Please read and understand this manual carefully before operating the product.
The boiler must not be used for any other purpose than the intended purpose.
Operating the boiler for an unintended purpose may lead to dangerous situation.
Do not step on the boiler or use the boiler as a support.
Do not hang out wash near the boiler or flue for drying. Wash hangers or similar
devices must be kept away from the boiler by an appropriate distance. Otherwise, fire
may break out.
The user shall take all the responsibilities for appropriate use of the product. The
manufacturer does not take any responsibilities neither civil nor penal.
Unauthorized modification is prohibited. Failure of using genuine parts can lead to
dangerous situation for the user. This company does not take any responsibilities neither
civil nor penal.
The boiler flue tubes are very hot. Do not touch the flue tubes before the boiler has
been cooled down sufficiently or without wearing safe, insulating gloves.
Do not touch the boiler with wet hands, since it is an electrical equipment. Disconnect
power supply cable before doing any work with the boiler.
Turn off main power switch or disconnect power cord before conducting a maintenance
work.
The boiler must be grounded with an effective conductor.
To Next Page
Loading...
