Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E9 / E9i / E15E15
10 10 V V 1.01.0
33
Safety NoticesSafety Notices
3.13.1
General InformationGeneral Information
The KLS Martin operating lights are quality products designed and manufactured in complianceThe KLS Martin operating lights are quality products designed and manufactured in compliance
with recognized technical rules and current standards. The lights left the factory in a perfectlywith recognized technical rules and current standards. The lights left the factory in a perfectly
safe working condition.safe working condition.
For your own safetyFor your own safety
••
Carefully read the safety instructions relating to servicing work (which includes lightCarefully read the safety instructions relating to servicing work (which includes light
system installation).system installation).
•• For your own safety, be sure to observe and follow the instructions provided!For your own safety, be sure to observe and follow the instructions provided!
••
Specifically, heed the safety instructions provided in the sections describing the mountingSpecifically, heed the safety instructions provided in the sections describing the mounting
procedures!procedures!
•• The components of the light system may only be used for their intended purpose–i.e.The components of the light system may only be used for their intended purpose–i.e.
mounting / installing the operating lights!mounting / installing the operating lights!
Service workService work
•• Any service work must be performed:Any service work must be performed:
—— by qualified persons specially authorized by Gebrüder Martin to perform such tasksby qualified persons specially authorized by Gebrüder Martin to perform such tasks
—— in accordance with the instructions provided in this manualin accordance with the instructions provided in this manual
—— competently and with utmost precisioncompetently and with utmost precision
—— in compliance with relevant technical, safety and accident-prevention regulationsin compliance with relevant technical, safety and accident-prevention regulations
••
The parts to be mounted must be checked for defects and potential damage in transitThe parts to be mounted must be checked for defects and potential damage in transit
immediately upon receipt of the goods.immediately upon receipt of the goods.
•• Safety check and test reportSafety check and test report
••
As part of the installation workAs part of the installation work
, all safety-related parts must be checked in accordance, all safety-related parts must be checked in accordance
with the specifiedwith the specified
Safety Check (SC)Safety Check (SC)
procedures.procedures.
•• Document the results of the check in the correspondingDocument the results of the check in the corresponding
Test ReportTest Report
. For the test. For the test
instructions (safety check) and the test report form, please refer to the end of thisinstructions (safety check) and the test report form, please refer to the end of this
document.document.
MaintenanceMaintenance
We recommend checking all functions of the light, the spring / tracking arms, the ceiling tubeWe recommend checking all functions of the light, the spring / tracking arms, the ceiling tube
and the power supply unit (PSU) for proper working order at regular intervals.and the power supply unit (PSU) for proper working order at regular intervals.
Every 24 months, a Safety Check (SC)Every 24 months, a Safety Check (SC)
mustmust
be performed by an authorized person! A detailedbe performed by an authorized person! A detailed
description of the procedure as well as the appropriate Test Report form can be found indescription of the procedure as well as the appropriate Test Report form can be found in
section 10 ”Technical Safety Check and Intensive Maintenance”, page 72.section 10 ”Technical Safety Check and Intensive Maintenance”, page 72.
To Next Page
Loading...
